Henry's Hub Studio

Your design or words on a real garment, printed and posted from the UK.

Drag to move · corner to resize · top handle to turn
Layers

Front to back. Tap one to select it; ▲ brings it forward, ▼ sends it back, ✕ deletes it.

Nothing on the garment yet. Add a design, some words or a studio drawing.

Henry's Hub Studio

Garment · Colour · Size
Garment Tap to switch. Your design comes with you
Colour
Size

Upload

PNG with a transparent background prints best. JPG or WEBP photos print as a rectangle. Up to 25 MB. You can also drop a file onto the garment.

How many of this design?

Design studio: 3 free designs to try, then 5 a day with your email.

Printed and dispatched from the UK · questions: sales@henryshub.co.uk

Premium AS Colour blank
Made to order in Kettering
Posted within 3 to 4 working days
Size guide
How to measure a hoodie: A is width, straight across from armpit to armpit. B is length, from the highest point of the shoulder next to the hood straight down to the bottom of the hem.AB
A Width
Lay the top flat and measure straight across the chest, from armpit to armpit.
B Length
Measure from the highest point of the shoulder, next to the hood, straight down to the bottom of the hem.

AS Colour 5102 measurements in centimetres, with inches in brackets. Each garment can vary by up to ±2.5 cm.

SizeA WidthB Length
XS49 cm (19.3″)65 cm (25.6″)
S52 cm (20.5″)71 cm (27.9″)
M55 cm (21.6″)74 cm (29.1″)
L58 cm (22.8″)77 cm (30.3″)
XL61 cm (24.0″)79.5 cm (31.3″)
2XL64 cm (25.2″)82 cm (32.3″)
3XL67 cm (26.4″)84.5 cm (33.3″)
4XL70 cm (27.6″)86 cm (33.9″)
5XL73 cm (28.7″)87.5 cm (34.5″)

Not sure which size? Lay a top you already own flat, measure A and B the same way, and pick the size with the closest numbers. Doubling A gives you the measurement all the way round.

Fabric, printing & care
BlankAS Colour 5102 Stencil Hood
Weight350 gsm, midweight
Fabric80% cotton, 20% recycled polyester anti-pill CVC fleece
FitRegular fit
FeelMid-heavy fleece made to resist pilling
  • Pullover hood, lined, with a tonal shoestring drawcord
  • Kangaroo pocket
  • Inset sleeves and ribbed cuffs
  • Pre-shrunk to keep shrinkage low
  • Recycled polyester saves around 4.5 plastic bottles (500ml) per hoodie

How we print it

Your design is made into a DTF (direct-to-film) transfer and heat-pressed onto the garment by hand in our studio in Kettering. DTF gives full colour and fine detail, photos included, on light and dark fabrics, and the print stays soft and flexible.

Caring for it

  • Turn it inside out and wash at 30°C or colder, with similar colours.
  • No bleach or fabric softener.
  • Line dry, or tumble dry on low.
  • Don’t iron directly on the print. Iron inside out if you need to.
  • Don’t dry clean.

The custom hoodie that brings structure, sustainability, and serious warmth.

The AS Colour Stencil Hood steps things up a notch. Built on the 5102, it's a mid-heavy weight 350 GSM CVC fleece blend of 80% cotton and 20% recycled polyester with an anti-pill finish, meaning it looks as good after 100 washes as it did on day one.

Where the Relax Hood leans into an oversized silhouette, the Stencil Hood takes a regular fit with inset sleeves for a more structured, classic hoodie shape that works in any setting. The lined hood, tonal shoestring drawcord, kangaroo pocket, and ribbed sleeve cuffs round off a construction that is built to last and built to impress.

Each hoodie saves approximately 4.5 x 500ml plastic bottles from landfill. Pre-shrunk and ready for your artwork. Just upload your design and we'll handle everything from print to delivery.

  • 350 GSM, 80% cotton, 20% recycled polyester anti-pill CVC fleece
  • Regular fit with inset sleeves, pullover style
  • Lined hood with tonal shoestring drawcord
  • Kangaroo pocket | Ribbed sleeve cuffs | Pre-shrunk
  • Saves approx. 4.5 x 500ml plastic bottles from landfill

The blank: AS Colour

Every garment we print is an AS Colour blank, bought directly from AS Colour. They have made premium blank clothing for printers and makers for more than twenty years, and we chose them for the weight of the cotton, the cut and the colour range. This is the exact garment your design goes on.

Why the 5102 Stencil Hood

350 gsm cotton-rich fleece

80% cotton and 20% recycled polyester. A mid-heavy weight for everyday wear.

Anti-pill fleece

The fleece is made to resist pilling. Its recycled polyester saves around 4.5 plastic bottles (500 ml) per hoodie.

Regular fit, classic details

A lined hood with a tonal shoestring drawcord, a kangaroo pocket, inset sleeves and ribbed cuffs. Pre-shrunk to keep shrinkage low.

How it works

1. Pick your colour and size

Eleven colours, XS to 5XL. The size guide tab shows where to measure.

2. Add your design

Upload a logo, a photo or artwork, and place it where you want it on the tee.

3. We press it and post it

Pressed by hand in our Kettering studio and posted within 3 to 4 working days by Royal Mail.

Questions about the 5102

Is this a genuine AS Colour tee?

Yes. We print on the AS Colour 5102 Stencil Hood, straight from AS Colour.

Which size should I get?

It’s a regular fit, not oversized. Open the Size guide tab above, measure a hoodie you already own the same way and pick the closest size.

How long does delivery take?

Standard orders of garments are posted within 3 to 4 working days (mugs within 2) and Royal Mail usually delivers in 1 to 3 working days. Priority orders are made first and posted the next working day. We deliver to UK addresses.

Will the colour match the photo exactly?

Very closely. Screens show colour differently, so a small difference is normal and isn’t a fault.

How do I look after the print?

Wash it inside out at 30°C or colder with similar colours, skip bleach and fabric softener, and don’t iron directly on the print.

Can I return it?

Each tee is made to order with your design, so we can’t take it back if you change your mind. If it arrives faulty, damaged or wrong, email us within 30 days and we’ll reprint it or refund you. See our Return and refund policy.